Yearly Archives: 2024

　　Is it better to have a multi-core cable or a single-core cable? The difference between single-core cables and multi-core cables. Power cables are generally divided into single-core, double-core and three-core cables. Among them, single-core cables refer to cables with only one conductor in one insulation layer, while double-core cables refer to cables with two conductors in one insulation layer. In fact, both have their advantages and disadvantages. For example, when the line of a single-core cable is long, when the control circuit with a large current is used or when it is laid in water, in order to prevent or reduce the middle connector, or when single-core cables have better comprehensive safety engineering than multi-core cables, single-core cables can be used.As a representative of the industry, multicore cable price It is necessary to set a certain example for peers and lead the way in product quality. https://www.linkcablecn.com

　　Is it better to have a multi-core cable or a single-core cable?

　　1. From the current point of view, the current passing through a multi-core cable with the same cross-sectional area is relatively larger than that of a single-core cable, and the load is large.

　　2. From the perspective of power loss, the two ends of the single-core cableare directly grounded, and the metal shielding layer of the cable may also generate circulating current that can reach the current carrying capacity of the cable, which wastes power and forms loss. Multi-core cables are generally three-core cables, because during the operation of the cable, the sum of the currents flowing through the three cores is zero, and there is basically no induced voltage at both ends of the cable metal shielding layer.

　　3. From the perspective of cost, among the wires of the same cross-sectional area, the cost of single-core cables is cheaper than that of multi-core cables, and multi-core cables are slightly more expensive.

　　4. From the perspective of installation, single-core cables appear harder when passing through pipes, while multi-core cables are softer and easier to wire.

　　Multicore Flexible Cables.jpg

　　Multicore Flexible Cable.jpg

　　The difference between single-core cables and multi-core cables

　　2-core cables: When the neutral line of 1kv and below power supplies is directly grounded, the number of cable cores of the single-phase control circuit should be 2-core cables when the maintenance line and the neutral point share the same conductor. For control circuits that can be powered by DC, 2-core cables should be used.

　　3-core cable: When the neutral line of 1kv and below power supply is directly grounded, the number of cable cores of the single-phase power control circuit is: When the protection line and neutral point are separate, it is advisable to use a 3-core cable.

　　4-core cable: 1kv and below 4-core cable (3+1 cable), in which the fourth core is used as a grounding protection, and also carries the unbalanced current and short-circuit capacity of the power supply system. (To learn more about cable technology, please click here, a lot of dry goods are waiting for you) Its size is determined by the unbalanced current and short-circuit capacity, but generally cannot be less than 1/2 of the phase line.

　　5-core cable: 1kv and below three-phase four-wire distribution room system, some electrical equipment distribution lines with higher safety requirements, and some communication centers and automation equipment that must ensure power safety and anti-interference grounding, it is advisable to use 5 copper core cable TN-C distribution room system, so that the protection line (PE line) and neutral point (PN line) are independent, and the cable core section is generally 3 large and 2 small or 4 large and 1 small or 5 large.

　　Multicore Flexible Cable supplier.jpg

　　The difference between 4-core cable and 3+1 core cable: 1kv and below three-phase four-wire distribution room system, when the protection line and neutral point share the same conductor, 4-core cable should be used, and the method of 3-core cable plus single-core cable to form a circuit cannot be used, or even the method of directly using the metal sheath or armored cable layer of 3-core cable as the neutral point. Otherwise, when the 3-phase current is unbalanced, it is equivalent to the operation of a single-core cable, which is easy to cause DC interference.

　　In the quest for reliable and efficient portable power solutions, the Packsico 3000W/3108Wh Portable Power Station stands out as a top contender. This powerhouse of a device is designed to meet the diverse energy needs of modern users, from outdoor enthusiasts to emergency preparedness experts. In this blog post, we¨ll explore the features, benefits, and practical applications of the Packsico 3000W/3108Wh Portable Power Station, demonstrating why it¨s an essential tool for anyone in need of portable power.It is strictly required by such a standard, packsico portable power station manufacturer Only with today’s development scale, can we have the proud momentum to crush our competitors. https://www.packsico.com/

　　Why Choose the Packsico 3000W/3108Wh Portable Power Station?

　　High Power Output

　　With a robust 3000W output and a 3108Wh capacity, the packsico portable power station can handle a wide range of devices and appliances. Whether you¨re powering a campsite, running household appliances during a blackout, or supporting remote work setups, this power station delivers consistent and reliable energy.

　　Long-Lasting Battery Life

　　Equipped with a high-capacity lithium battery, the Packsico power station offers extended battery life, ensuring you have power when you need it most. Its impressive 3108Wh capacity allows for prolonged use, making it perfect for long trips and extended outages.

　　Versatile Charging Options

　　The Packsico 3000W/3108Wh Portable Power Station features multiple charging ports, including AC outlets, USB ports, and DC outputs. This versatility allows you to charge everything from smartphones and laptops to power tools and kitchen appliances. It also supports solar panel charging, promoting eco-friendly energy use.

　　Compact and Portable Design

　　Despite its powerful capabilities, the Packsico power station is designed to be compact and portable. Its sturdy build and convenient carrying handle make it easy to transport, so you can take reliable power with you wherever you go.

　　Practical Applications of the Packsico 3000W/3108Wh Portable Power Station

　　Outdoor Adventures

　　For campers, hikers, and outdoor enthusiasts, the Packsico power station is a game-changer. It provides ample power to keep your devices charged, run portable fridges, and even power electric grills, enhancing your outdoor experience with the comforts of home.

　　Emergency Preparedness

　　In emergencies, having a dependable power source is crucial. The Packsico power station ensures you¨re prepared for power outages, natural disasters, and other emergencies. Keep essential devices like medical equipment, communication tools, and lights powered up when you need them most.

　　Remote Work and Travel

　　As remote work continues to rise, having a reliable power source on the go is essential. The Packsico power station supports remote work by providing a stable power supply for laptops, monitors, and other office equipment. It¨s perfect for digital nomads and remote workers who need to stay productive wherever they are.

　　Conclusion

　　The Packsico 3000W/3108Wh Portable Power Station is a versatile, powerful, and reliable solution for all your portable power needs. Its high power output, long-lasting battery, versatile charging options, and compact design make it an ideal choice for outdoor adventures, emergency preparedness, and remote work.

　　Invest in the Packsico 3000W/3108Wh Portable Power Station today and experience the freedom of reliable, portable power. Whether you¨re exploring the great outdoors, preparing for emergencies, or working remotely, this power station ensures you have the energy you need, whenever and wherever you need it.

　　MVR evaporator has excellent energy-saving performance. Through mechanical compressors, low-temperature steam is compressed, heated and reused, and MVR evaporator realizes energy recycling, thereby greatly reducing energy consumption, saving costs, and meeting the requirements of energy conservation and environmental protection. MVR evaporator can ensure product quality. Since MVR evaporator can evaporate at a lower temperature, it is suitable for occasions with high product quality requirements, and can effectively avoid product quality loss caused by high temperature. MVR evaporator has a wide range of applications. It is suitable for evaporation, concentration and crystallization separation of various solutions, and is widely used in chemical, food, pharmaceutical and other industries. At the same time, MVR evaporator adopts an automatic control system, which is easy to operate, stable and reliable, reduces manual intervention, and improves production efficiency.To some extent, evaporator Our development has surpassed many peer businesses, but it has never stopped moving forward. https://www.wteya.com/

　　mvr evaporator

　　TVR evaporator (Thermal Vapor Recompression, thermal vapor recompression evaporator) is an efficient evaporation equipment with many characteristics and advantages. TVR evaporator has excellent energy-saving performance. It uses the principle of thermal recompression to compress and heat low-temperature steam for reuse, realizing energy recycling, thereby greatly reducing energy consumption, saving costs, and meeting the requirements of energy conservation and environmental protection. TVR evaporator can guarantee product quality. Since TVR evaporator can evaporate at a relatively low temperature, it is suitable for occasions with high requirements for product quality, and can effectively avoid product quality loss caused by high temperature. TVR evaporator has a wide range of applications. It is suitable for evaporation concentration and crystallization separation of various solutions, and is widely used in chemical, food, pharmaceutical and other industries. At the same time, TVR evaporator adopts an automatic control system, which is easy to operate, stable and reliable, reduces manual intervention, and improves production efficiency.

　　mvr evaporator

　　MVR (Mechanical Vapor Recompression) evaporator and TVR (Thermal Vapor Recompression) evaporator are both evaporation equipment that use vapor recompression technology to achieve energy recovery, but there are some differences between them:

　　1. Different energy utilization methods: MVR evaporator uses a mechanical compressor to compress and reuse vapor, while TVR evaporator uses a thermal compressor to compress and reuse vapor.

　　2. Different energy consumption: The mechanical compressor of the MVR evaporator needs to consume a certain amount of electrical energy to achieve vapor recompression, while the TVR evaporator needs to consume thermal energy to achieve vapor recompression.

　　3. Different scope of application: Since the MVR evaporator uses a mechanical compressor, it is more suitable in some occasions, such as when electrical energy is required but not thermal energy; while the TVR evaporator is more suitable for occasions that can provide thermal energy.

　　In the world of computer hardware, efficient data transfer and storage are paramount. One of the key components facilitating this process is the SATA (Serial ATA) hard drive data cable. This blog post delves into the significance, types, and applications of SATA hard drive data cables in modern computing.know D-SUB connector Our growth has to go through many hardships, but entrepreneurs are never afraid and boldly move forward. https://www.xpbdz.com/

　　What is a SATA Hard Drive Data Cable?

　　SATA hard drive data cables are essential for connecting storage devices like hard drives and SSDs (Solid State Drives) to the motherboard. Introduced in the early 2000s, SATA technology replaced the older PATA (Parallel ATA) system, offering faster data transfer rates and improved overall performance.

　　Key Features and Benefits

　　1.High Data Transfer Rates: SATA cables support data transfer rates ranging from 1.5 Gbps to 6 Gbps, depending on the version (SATA I, II, or III). This ensures swift and efficient data access and storage.

　　2.Slim and Flexible Design: Unlike bulky PATA cables, SATA cables are thin and flexible, promoting better airflow within the computer case and reducing cable clutter.

　　3.Hot Swapping: SATA technology supports hot swapping, allowing users to connect and disconnect drives without powering down the system. This feature is particularly useful for server environments and systems requiring frequent hardware changes.

　　SATA hard drive data cable

　　Types of SATA Hard Drive Data Cables

　　1.Standard SATA Cables: Typically 7-pin connectors, these cables are used for general data transfer between the hard drive and motherboard.

　　2.SATA Power Cables: These provide the necessary power to the SATA drives and are usually 15-pin connectors.

　　3.eSATA Cables: Designed for external SATA drives, eSATA cables offer similar performance to internal SATA cables but with enhanced shielding and connectors for external use.

　　Applications in Modern Computing

　　1.Personal Computers and Laptops: SATA cables are widely used in desktops and laptops for connecting internal storage devices, ensuring efficient data transfer and storage management.

　　2.Servers and Data Centers: In server environments, SATA cables connect multiple hard drives, facilitating robust data storage solutions and ensuring quick data access and backup processes.

　　3.Gaming Consoles: Many gaming consoles utilize SATA cables to connect internal storage devices, enabling fast game load times and efficient data management.

　　4.External Storage Solutions: SATA cables are also used in external storage devices, such as external hard drives and docking stations, providing users with flexible and high-speed storage options.

　　Conclusion

　　SATA hard drive data cables play a crucial role in modern computing, offering high data transfer rates, flexible design, and hot swapping capabilities. Whether you are building a new PC, upgrading your storage, or managing a data center, understanding the importance and applications of SATA cables can help you optimize your system’s performance. Embrace the power of SATA technology and ensure your data transfer and storage needs are met with efficiency and reliability.

　　Recharge Your Adventures with a Compact, Reliable Power SourceWith the expanding influence of the industry, 1000W portable power station Our business is also constantly spreading, and the development of the market is also gradually advancing. https://www.packsico.com/

　　The Importance of Portable Power

　　In today’s fast-paced, technology-driven world, having a reliable source of power on the go has become a necessity. Whether you’re hiking in the great outdoors, embarking on a road trip, or attending a music festival, the need for a constant supply of electricity to charge your devices is ever-present. This is where the power of a travel-sized electricity generator comes into play, allowing you to harness energy wherever your adventures take you.

　　Introducing the Compact Electricity Generator

　　Designed to be the ultimate companion for the modern, on-the-move individual, the travel-sized electricity generator is a versatile and compact solution to your power needs. Featuring a sleek, lightweight design, this innovative device can be easily packed into your luggage or backpack, ensuring that you never have to worry about your devices running out of juice.

　　Powering Your Devices with Ease

　　The travel-sized electricity generator is equipped with a range of charging ports, catering to a variety of devices, from smartphones and tablets to laptops and cameras. With the ability to charge multiple devices simultaneously, you can keep your entire digital ecosystem powered up and ready to go, no matter where your journey takes you.

　　Reliable and Long-Lasting Performance

　　Powered by a high-capacity battery and equipped with advanced charging technology, the travel-sized electricity generator offers reliable and long-lasting performance. Whether you’re exploring remote areas or navigating bustling cities, you can rest assured that your devices will be kept charged and ready to use, ensuring that you never miss a moment or a crucial connection.

　　Versatile and Adaptable Design

　　The travel-sized electricity generator is designed to be versatile and adaptable, making it the perfect companion for any adventure. Its compact size and lightweight construction allow for easy transportation, while its rugged design ensures that it can withstand the rigors of travel. Additionally, the generator can be powered by a variety of energy sources, including solar panels, wall outlets, and even car chargers, giving you the flexibility to recharge your devices no matter where you are.

　　In conclusion, the travel-sized electricity generator is the ultimate solution for keeping your devices powered up and ready to go, no matter where your adventures take you. With its reliable performance, versatile design, and compact size, this innovative device is the perfect companion for the modern, on-the-move individual, empowering you to stay connected and energized wherever you go.

　　Pulp molding, also known as molded pulp packaging, is a sustainable and environmentally friendly method of producing packaging materials. This innovative process involves using recycled paper and natural fibers to create a wide range of packaging products, including pulp molded packaging and pulp mold packaging. By utilizing materials that are biodegradable and renewable, pulp molding helps to reduce the stress on the earth’s resources and minimize the environmental impact of packaging production.One of the key advantages of pulp molding is its ability to provide a cost-effective and efficient solution for packaging needs. The process begins with the collection of waste paper, which is then broken down into a pulp and mixed with water to form a slurry. This slurry is then poured into molds of various shapes and sizes, where it is dried and formed into the desired packaging product. The resulting pulp molded packaging is not only lightweight and durable but also provides excellent protection for a wide range of products, from electronics to food and beverage items.It is strictly required by such a standard, molded pulp packaging Only with today’s development scale, can we have the proud momentum to crush our competitors. https://www.pulptray.com/

　　In addition to its practical benefits, pulp molded packaging offers significant environmental advantages. By using recycled materials as its primary source, pulp molding helps to reduce the amount of waste sent to landfills and minimizes the need for virgin paper production. Furthermore, the biodegradable nature of pulp molded packaging means that it can be easily recycled or composted at the end of its life cycle, further reducing its impact on the environment.Another important aspect of pulp molding is its versatility in design and customization. Manufacturers of pulp mold packaging can create a wide variety of shapes, sizes, and configurations to meet the specific needs of their customers. Whether it’s protective cushioning for delicate items or custom-designed trays for retail display, pulp molded packaging can be tailored to fit virtually any product or industry.

　　pulp mold packaging

　　pulp molding

　　Furthermore, the production process for pulp molded packaging is relatively energy-efficient compared to other traditional packaging methods. The use of natural fibers and recycled materials requires less energy input during manufacturing, making it a more sustainable option for businesses looking to reduce their carbon footprint.As consumer demand for sustainable and eco-friendly products continues to grow, the market for pulp molded packaging is expanding rapidly. Many companies are recognizing the benefits of using environmentally responsible packaging solutions and are turning to pulp molding as a viable alternative to traditional packaging materials. In response to this demand, an increasing number of manufacturers are specializing in pulp mold packaging, offering a wide range of innovative and customizable solutions for businesses across various industries.

　　pulp tray packaging

　　In summary, pulp molding represents a significant advancement in sustainable packaging solutions. By utilizing recycled materials, minimizing waste, and offering versatile design options, pulp molded packaging provides a practical and eco-friendly alternative for businesses seeking to reduce their environmental impact. As the demand for sustainable packaging continues to rise, pulp molding is poised to play a crucial role in helping to reduce stress on the earth’s resources while meeting the diverse needs of modern industries. With its cost-effective production process and positive environmental impact, pulp molded packaging is set to become an increasingly prevalent choice for businesses looking to prioritize sustainability in their operations.

　　Introduction of Ultrafiltration System for Drinking Water TreatmentIn order to achieve the goal, evaporator Turn cocoon into butterfly, constantly polish product quality, improve business ability, and finally have a place in the market. https://www.wteya.com/

　　In view of the characteristics of water quality required by the beverage industry, the ultrafiltration system for beverage industry is designed as an efficient water treatment technology for purifying and recycling wastewater. The system can remove impurities in water and purify water molecules through a precise membrane separation process.

　　Composition of Ultrafiltration System for Drinking Water Treatment

　　The ultrafiltration system for beverage industry is mainly composed of water inlet pump, pretreatment device, membrane element, cleaning equipment and control system. Among them, the water inlet pump ensures that the wastewater enters the system smoothly; the pretreatment device is used to remove large particles in the water and adjust the pH value; the membrane element performs precise solid-liquid separation tasks; the cleaning equipment is used to maintain the cleanliness and stable performance of the membrane element; the control system monitors the operating parameters in real time to ensure that the system works efficiently and stably.

　　ultrafiltration system

　　Technical Principles of Ultrafiltration System for Drinking Water Treatment

　　The core technology of ultrafiltration system for beverage industry lies in the selective permeable semipermeable membrane it uses. This membrane made of polymer material has a specific pore size, which can effectively intercept organic matter, pigments, flavors and other impurities in wastewater, while allowing water molecules and small molecular solutes to pass through. By precisely controlling the membrane pore size, pollutants of different sizes can be intercepted and separated.

　　Technical advantages of ultrafiltration system for drinking water treatment

　　l High efficiency: can quickly reduce the content of organic matter and suspended matter in wastewater and improve water quality.

　　l Energy saving and environmental protection: compared with traditional treatment methods, it is more energy-saving and does not produce secondary pollution.

　　l Small footprint: the system design is compact and suitable for installation and use by beverage production companies of different sizes.

　　l Low operating cost: reduces the use of chemicals and reduces subsequent treatment costs.

　　UF system

　　Advantages of WTEYA water treatment plant manufacturer

　　WTEYA water treatment plant manufacturer focuses on the research and development and production of ultrafiltration systems in the beverage industry and has more than fifteen years of experience in the field of environmental protection. We are committed to providing a full set of water treatment equipment and solutions for various industries to help customers achieve the goal of zero emissions and wastewater resource utilization. Our products not only perform well, but also provide customers with comprehensive technical support and quality services to help companies achieve green and sustainable development.

　　In the automotive industry, the importance of high-quality wiring harnesses cannot be overstated. These essential components ensure the seamless transmission of electrical signals and power throughout vehicles, playing a crucial role in their overall functionality and safety. XPB, a leader in the automotive wiring industry, offers top-tier wholesale automotive wire harnesses that meet the diverse needs of manufacturers worldwide. This blog post explores the features, benefits, and applications of XPB¨s wholesale automotive wire harnesses, highlighting why they are the preferred choice for automotive professionals.From the demand side, xpb terminal wire More in line with the psychological expectations of consumers, willing to pay for the things they like. https://www.xpbdz.com/

　　Understanding Automotive Wire Harnesses

　　An automotive wire harness is an organized set of wires, terminals, and connectors that run throughout the vehicle to relay information and electric power. These harnesses are essential for connecting various electrical and electronic components, ensuring the vehicle operates efficiently and safely.

　　Automotive connection cable

　　Why Choose XPB Wholesale Automotive Wire Harnesses?

　　XPB stands out in the market due to its commitment to quality, innovation, and customer satisfaction. Here are some key reasons why XPB¨s automotive wire harnesses are highly regarded:

　　1. Superior Quality Materials:

　　XPB uses only the highest quality materials to manufacture their wire harnesses, ensuring durability, reliability, and longevity. This results in products that can withstand the harsh conditions often encountered in automotive environments.

　　2. Advanced Manufacturing Techniques:

　　Employing state-of-the-art manufacturing processes, XPB ensures precision and consistency in every wire harness produced. This attention to detail minimizes the risk of defects and enhances the overall performance of the harnesses.

　　3. Customization Options:

　　XPB understands that different vehicles have unique requirements. Therefore, they offer customized wire harness solutions tailored to meet specific needs, whether for passenger cars, trucks, or specialized vehicles.

　　4. Comprehensive Testing:

　　Each wire harness undergoes rigorous testing to ensure it meets the highest standards of quality and performance. This includes tests for electrical continuity, resistance, and environmental stress, guaranteeing that every product is ready for the road.

　　5. Competitive Pricing:

　　By offering wholesale options, XPB provides cost-effective solutions for automotive manufacturers and suppliers. Their competitive pricing ensures that clients receive excellent value without compromising on quality.

　　automotive connection cable

　　Benefits of XPB Wholesale Automotive Wire Harnesses

　　Enhanced Reliability:

　　With XPB¨s high-quality wire harnesses, vehicles experience fewer electrical issues, resulting in enhanced reliability and performance.

　　Improved Safety:

　　Well-designed and thoroughly tested wire harnesses reduce the risk of electrical failures, enhancing the overall safety of the vehicle.

　　Ease of Installation:

　　XPB¨s wire harnesses are designed for easy installation, reducing labor costs and time during vehicle assembly.

　　In today’s fast-paced world, having a reliable source of power during emergencies is essential. Portable power stations have emerged as the go-to solution for ensuring you stay connected and powered up, no matter the circumstances. Here’s why a portable power station is the ideal emergency power supply unit.It is strictly required by such a standard, packsico portable power station manufacturer Only with today’s development scale, can we have the proud momentum to crush our competitors. https://www.packsico.com/

　　1. Versatility and Portability

　　One of the standout features of portable power stations is their versatility. These compact units can power a wide range of devices, from smartphones and laptops to medical equipment and home appliances. Their lightweight and compact design make them easy to transport, allowing you to carry them wherever you go. Whether you¨re at home, in your car, or camping in the wilderness, a portable power station ensures you have access to power when you need it most.

　　2. Ease of Use

　　Portable power stations are designed with user-friendliness in mind. They come with simple interfaces, making them easy to operate even for those who are not tech-savvy. Most models feature multiple outlets and USB ports, allowing you to charge and run several devices simultaneously. Additionally, many portable power stations come with solar panel compatibility, providing an eco-friendly option for recharging the unit.

　　3. Reliable Power Source

　　During emergencies, having a reliable power source is crucial. Portable power stations are equipped with high-capacity batteries that provide long-lasting power. They are designed to maintain a steady power supply, ensuring your devices stay charged for extended periods. This reliability is particularly important during natural disasters or power outages when traditional power sources may be unavailable.

　　4. Environmentally Friendly

　　Traditional generators often rely on fossil fuels, which can be harmful to the environment. Portable power stations, on the other hand, are typically powered by lithium-ion batteries and can be recharged using solar panels. This makes them a more environmentally friendly option. By using a portable power station, you can reduce your carbon footprint while still ensuring you have the power you need during emergencies.

　　5. Quiet Operation

　　Unlike noisy generators, portable power stations operate quietly. This is particularly advantageous during emergencies when maintaining a calm and quiet environment is important. The quiet operation of portable power stations ensures that you can use them indoors without causing disturbance, making them suitable for a variety of settings, including homes, offices, and healthcare facilities.

　　6. Cost-Effective

　　While the initial investment in a portable power station may be higher than some other emergency power solutions, they are more cost-effective in the long run. They require minimal maintenance and do not incur ongoing fuel costs like traditional generators. Additionally, the ability to recharge using solar panels can further reduce operational costs, making portable power stations a smart financial investment for emergency preparedness.

　　Conclusion

　　In conclusion, a portable power station stands out as the ideal emergency power supply unit due to its versatility, ease of use, reliability, environmental friendliness, quiet operation, and cost-effectiveness. By investing in a portable power station, you can ensure that you and your loved ones stay connected and powered up during emergencies, providing peace of mind and security in uncertain times.

　　With the development of society, green packaging has gradually become a consensus of society. In recent years, the development of paper mold products equipment in my country has been very rapid and gradually mature. Pulp molded products have unique advantages in terms of raw materials and processes in the production process, which are more in line with the concept of sustainable development of mankind. Pulp molded products are currently involved in food, medical, household appliances, industrial building materials, agriculture and other fields. So, why should we replace pulp moulded packaging for products?Before that, dry pressed molded pulp The market has also soared for a time, which has attracted the attention of a wide range of investors. https://www.pulptray.com/

　　1. Social development and global environmental protection attitude

　　According to data, the proportion of unrecycled plastic waste in the world is as high as 90.5%. Among such a huge amount of plastic waste, only 9% is recycled and only 12% is incinerated. Most of the remaining plastics will be landfilled on land or flow into the ocean, and it will take 400-500 years to degrade to become a substance that is harmless to nature and the food chain. It has been reported that a market basis should be provided for degradable tableware. In addition, the market demand for environmentally friendly packaging has increased, which has led major companies to continue looking for new packaging materials for sustainable development. Pulp molding, as a 100% plastic-free, fully degradable environmentally friendly product, has undoubtedly fundamentally solved the problem of plastic pollution.

　　2. Advantages of Pulp Molding Packaging

　　Pulp molding raw materials use plant fibers such as sugarcane bagasse and bamboo residue, which have the ability to be renewable in a short period of time. In addition to its own environmental protection, it does not require the felling of a tree. No chemicals are added during the pulping process. It is just water, recycled corrugated paper, waste paper scraps or newsprint. During the manufacturing process, it is a very friendly process for the protection of the earth’s environment, and no toxic or harmful materials will be introduced or discharged into the environment.

　　3. Paper and plastic products are degradable

　　All waste is returned to the pulp to achieve zero manufacturing waste. The final packaging is also 100% recyclable. Under normal circumstances, pulp moulded packaging products discarded in the open air within three months can be completely degraded and composted under natural conditions. It will not cause secondary pollution and industrial waste products. Protect the environment and eliminate white pollution!

　　4. Comparison with traditional packaging boxes

　　Traditional handmade boxes, iron boxes, and plastic boxes violate environmental protection requirements from the perspective of raw materials. Most of them contain harmful substances such as PVC and acrylonitrile. After being discarded, they will cause irreversible damage to the ecological environment. The world produces more than 300 million tons of plastic each year, of which about 2 million to 8 million tons of plastic will enter the ocean. These marine garbage also seriously affects the ecological environment of the seabed. The harm of plastic, iron boxes bring high carbon emissions, and wooden boxes cut down a large number of trees.

　　5. Enhance brand responsibility and values ??

　　From the perspective of product form, moulded pulp products gives more choices for packaging appearance. Traditional packaging cannot or is difficult to achieve various special-shaped boxes. The differentiated appearance has high-end attributes. This is also one of the important reasons why most international brands are willing to use pulp molding packaging. Because the packaging of the product can often reflect some of the attributes of the product itself. A packaging appearance that fits the product makes it easier for consumers to accept and understand the product performance. At the same time, pulp molding packaging can give the brand differentiated characteristics from the touch! The environmental protection characteristics also make it more popular.

　　It is not accidental that enterprises choose pulp molding packaging, but the trend of the times. Sustainable development is the real development! As people’s environmental awareness continues to increase, environmentally friendly packaging products will receive more and more attention in the future. According to quantitative evaluation by international authoritative experts, only paper is the most promising green packaging material.