Walk-through metal detectors help to ensure a safer environment by screening for prohibited items and preventing potential threats.In addition to these aspects, baggage scanner machines The performance in other aspects is also relatively good, which has attracted everyone’s attention and research. https://secuzoan.com/

　　Walk-through metal detectors are used in many industries, such as factories, airports, and stations, and even schools. There are many students in schools, so safety is very important. When there are many people in school, such as during school hours and after school, the school will strengthen security patrols. But this is not enough. Some schools have set up security gates at the entrance to prevent weapons and other dangerous items from entering the school.

　　walk-through metal detectors

　　At the school gate, such an important place, people entering and leaving are not searched one by one. This practice is not practical, but will disrupt students’ learning psychology, and it is also a violation of human rights. If high-tech such as walk-through metal detectors are used in schools, dangerous items of dangerous people can be detected.

　　In addition, some smart walk-through metal detectors can also use the latest technology to detect whether the passer-by is carrying a mobile phone, which can effectively prevent students from bringing mobile phones into the campus to affect their study and rest, and can also prevent students from bringing mobile phones into the examination room and cheating by searching for answers on the Internet.

　　walk-through metal detectors

　　ZA5000

　　Therefore, it is necessary to install walk-through metal detectors in schools. The best location for walk-through metal detectors in schools is at the main entrance and the entrance of the passage. There should be no large metal objects within the installation range, otherwise it will cause other troubles. When installing walk-through metal detectors on campus, its sensitivity can be adjusted according to the actual situation, so that a good alarm effect can be achieved. After installing walk-through metal detectors, students should be avoided from crowding at the passage. It is recommended that you choose walk-through metal detectors with wider width and higher detection rate, so that the detection efficiency will be higher.

　　The development trends of the mold accessories industry include the following aspects:On the other hand, plastic mould part manufacturer It also brings tangible benefits to everyone and feels useful. It is a model of the industry. https://www.dghrjmmj.com

　　Production scale expansion: With the rapid development of manufacturing industry, the demand for molds and accessories continues to grow, especially in industries such as automotive, electronics, home appliances, medical equipment, etc. This will encourage mold accessory manufacturers to expand their production scale to meet market demand.

　　Technological innovation and upgrading: The mold parts industry will pay more attention to technological innovation and the improvement of research and development capabilities. Enterprises will increase their investment in digital and intelligent technologies, promote intelligent manufacturing and automated production, and improve the efficiency and accuracy of mold design and manufacturing processes.

　　Green and environmentally friendly development: Environmental protection and energy conservation and emission reduction have become important directions for industry development. Enterprises will promote the application of new technologies and materials with low energy consumption, low pollution, high efficiency and energy conservation to reduce their impact on the environment.

　　Strengthening industrial chain collaboration: The collaborative development between the mold parts industry and upstream and downstream industries will become even closer. Enterprises will strengthen cooperation with raw material suppliers and downstream customers, form a more complete industrial chain, and improve the efficiency and competitiveness of the entire industry.

　　Product precision: The dual upgrading of consumption and manufacturing industries, the arrival of the “Made in China 2025” era, and the continuous improvement of mold requirements in various industries have prompted the mold industry to develop towards precision. Mold companies need to continuously increase their investment in product design and development to meet market demand.

　　In short, the mold accessories industry will develop towards larger production scale, higher technological content, and more environmentally friendly direction in the future. At the same time, industrial chain collaboration and product precision will also become important development trends.

To some extent, 電子煙主機 Our development has surpassed many peer businesses, but it has never stopped moving forward.https://www.vapehost.tw

According to a reporter from the head office, on May 22, local time, Norway and Spain respectively announced that they would formally recognize the Palestinian state on May 28. Ireland subsequently announced its formal recognition of the State of Palestine.

From mid-April to early May, Barbados, Jamaica, the Bahamas and other countries have announced the recognition of the State of Palestine. At this stage, nearly 150 countries have recognized the Palestinian State.

What does it mean that more and more countries recognize a Palestinian state?

Three European countries recognized the State of Palestine on the same day

Norwegian Prime Minister Stetler announced on May 22 that Norway will recognize a Palestinian state. Mr Stiller said the approval would take effect on May 28.

Subsequently, Spanish Prime Minister Sanchez announced that the country would recognize a Palestinian state on May 28. In addition, Irish Prime Minister Simon Harris also said that Ireland will formally recognize the Palestinian state.

Israel: recall Ambassador Palestine: welcome the decision of the three countries

After Norway and other three countries announced their recognition of the Palestinian state, Israeli Foreign Minister Katz immediately said that he would recall Israel’s ambassadors to Norway and Ireland. Katz said the move sent a clear message to Norway and Ireland that Israel would not remain silent.

It is reported that Israel has also recalled its ambassador to Spain, but the Israeli Foreign Ministry has not yet publicly confirmed the recall of the ambassador to Spain. Katz will also summon the ambassadors of the three European countries to Israel to condemn the three countries’ decision to recognize a Palestinian state. It is reported that Katz will show ambassadors a video of Israeli female soldiers being detained by Hamas militants.

Palestinian President Abbas issued a statement highly appreciating and welcoming the recognition of the Palestinian state by the three European countries on the same day. The statement said that the decision of the three countries is a salvation of the Palestinian-Israeli two-state solution, which urges all countries in the world to follow the example of Norway, Ireland and Spain to recognize the Palestinian state and support the realization of peace and stability on the basis of the two-state solution.

On the same day, the Palestinian Islamic Resistance Movement (Hamas) also issued a statement welcoming the initiative of the three European countries.

Recently, these countries have recognized the Palestinian state one after another.

On 19 April, Barbados announced its decision to formally recognize Palestine as a State.

On 22 April, the Ministry of Foreign Affairs of Jamaica issued a statement formally recognizing the State of Palestine.

On 2 May, Trinidad and Tobago decided at a cabinet meeting to formally recognize the State of Palestine.

On 7 May, the Ministry of Foreign Affairs of the Bahamas issued a statement that the Bahamas had decided to formally recognize the State of Palestine.

On May 10, the tenth emergency special session of the United Nations General Assembly adopted a resolution by a vote of 143 to 9, with 25 abstentions, determining that the State of Palestine was qualified as a member of the United Nations under the Charter of the United Nations and should be accepted as a member of the United Nations.

What does it mean for more and more countries to recognize a Palestinian state?

Qin Tian, Deputy Director of the Middle East Research Institute of the China Institute of Modern International Relations:

On 10 May, the tenth emergency special session of the United Nations General Assembly adopted a resolution by an overwhelming majority, affirming that the State of Palestine conforms to the membership of the United Nations as stipulated in the Charter of the United Nations and should be accepted as a member of the United Nations. This has put some pressure on some Western countries.

At the same time, Israel has stepped up its offensive against Rafah in southern Gaza, casting a shadow over the prospect of peace between Palestine and Israel. Under this pressure, countries that do not have too deep ties with Israel are the first to take the step of diplomatically recognizing a Palestinian state.

Although this is only the behavior of some countries, the impact is considerable, which exerts certain pressure on Israel, which is diplomatic and moral support beneficial to Palestine. It will also help the two sides to reach a Palestinian-Israeli peace settlement on a more equal basis in the future.

　　In the world of action cameras, the firefly best action camera stands out as a top contender for capturing your most thrilling adventures. Whether you’re diving into the depths of the ocean, scaling mountain peaks, or enjoying an adrenaline-pumping ride, the Firefly camera is designed to deliver high-quality footage with ease. This blog post will delve into the features, benefits, and tips for using the Firefly Best Action Camera to ensure you get the most out of your action-packed experiences.Since then, more and more people have found that hawkeye firefly q6 action camera The value of, thus affecting the choice of many people. https://hawkeyecameras.com/

　　Key Features of the Firefly Best Action Camera

　　1. High-Resolution Video and Photos

　　The firefly best action camera offers stunning 4K video recording and high-resolution photo capabilities, ensuring every moment is captured in crystal-clear detail. Whether you’re filming fast-paced action or taking still shots, the camera delivers professional-quality results.

　　2. Durable and Waterproof Design

　　Built to withstand harsh environments, the Firefly camera is both rugged and waterproof. Its durable casing protects it from impacts, dust, and water, making it ideal for extreme sports and outdoor activities.

　　3. Wide-Angle Lens

　　With its wide-angle lens, the Firefly camera captures a broader field of view, ensuring you don’t miss any part of the action. This feature is perfect for capturing expansive landscapes and immersive action shots.

　　4. Stabilization Technology

　　To counteract the effects of motion and vibration, the Firefly Best Action Camera includes advanced stabilization technology. This ensures smooth and stable footage, even during the most turbulent activities.

　　5. User-Friendly Interface

　　The camera’s intuitive interface and touchscreen display make it easy to navigate settings and review footage on the go. Whether you’re a seasoned pro or a beginner, you’ll find the Firefly camera easy to use and operate.

　　6. Long Battery Life

　　Equipped with a long-lasting battery, the Firefly camera allows for extended recording sessions without the need for frequent recharges. This is particularly useful for all-day adventures and long filming projects.

　　Capture Your Adventures with the Firefly Best Action Camera: Features, Benefits, and Tips(夕1)

　　Benefits of Using the Firefly Best Action Camera

　　1. Versatility

　　The Firefly Best Action Camera is incredibly versatile, making it suitable for a wide range of activities, from extreme sports to casual outings. Its compact size and lightweight design mean you can take it anywhere without feeling weighed down.

　　2. High-Quality Footage

　　Thanks to its high-resolution capabilities and stabilization technology, the Firefly camera produces professional-grade footage and photos. Whether you’re creating content for social media, a personal blog, or professional projects, you can rely on the Firefly camera to deliver exceptional results.

　　3. Durability

　　Designed for adventure, the Firefly camera is built to last. Its robust construction ensures it can handle the rigors of outdoor activities, giving you peace of mind that your camera will perform in even the toughest conditions.

　　4. Ease of Use

　　With its user-friendly interface and touchscreen controls, the Firefly camera is easy to operate, even for beginners. This makes it accessible to a wide audience, from tech enthusiasts to casual users.

　　5. Connectivity

　　The Firefly Best Action Camera features built-in Wi-Fi and Bluetooth, allowing you to easily share your footage and photos with friends and family. You can quickly transfer files to your smartphone or tablet for instant editing and sharing on social media.

　　Capture Your Adventures with the Firefly Best Action Camera: Features, Benefits, and Tips(夕2)

　　Tips for Using the Firefly Best Action Camera

　　1. Plan Your Shots

　　Before you start recording, take some time to plan your shots. Consider the angles, lighting, and composition to ensure you capture the best possible footage. Planning ahead can help you avoid common filming mistakes and enhance the overall quality of your videos.

　　2. Use the Right Accessories

　　Enhance your filming experience by using the appropriate accessories for your Firefly camera. Mounts, tripods, and waterproof cases can help you achieve stable and creative shots in various environments. Investing in quality accessories can greatly expand the camera’s capabilities.

　　3. Experiment with Settings

　　Take advantage of the Firefly camera’s various settings and modes to capture unique and dynamic footage. Experiment with time-lapse, slow motion, and different resolution settings to find the best options for your needs.

　　4. Maintain Your Camera

　　Regular maintenance is key to keeping your Firefly camera in top condition. Clean the lens regularly, check for firmware updates, and store the camera in a protective case when not in use. Proper maintenance ensures your camera continues to perform at its best.

　　5. Edit Your Footage

　　Post-production is an important part of creating high-quality videos. Use editing software to trim, color-correct, and add effects to your footage. Editing can help you create polished and professional-looking videos that truly capture the essence of your adventures.

　　Conclusion

　　The Firefly Best Action Camera is an excellent choice for anyone looking to capture their adventures in stunning detail. With its high-resolution capabilities, durable design, and user-friendly features, it stands out as a top option in the world of action cameras. By understanding its key features, benefits, and best practices, you can make the most of your Firefly camera and create memorable footage that you’ll cherish for years to come. Whether you’re an adrenaline junkie or a casual explorer, the Firefly Best Action Camera is your perfect companion for capturing life’s most exciting moments.

　　In today’s security-conscious world, ensuring the safety of public spaces, private venues, and sensitive areas is a top priority. The MD3003B1 Handheld Metal Detector stands out as an essential tool for effective security screening. This comprehensive guide explores the technology, applications, and key benefits of the MD3003B1, demonstrating why it is indispensable for maintaining security.for a long time security screening machine It has an extraordinary development speed, and I believe that the future will be as overwhelming as ever. https://secuzoan.com/

　　Advanced Technology for Superior Detection

　　md3003b1 metal detector

　　Handheld metal detector MD3003B1

　　The MD3003B1 Handheld Metal Detector is built with cutting-edge technology to provide reliable and accurate metal detection:

　　1. High Sensitivity

　　The MD3003B1 is designed to detect even the smallest metal objects, making it highly effective in identifying concealed weapons, tools, and other metallic items. Its high sensitivity ensures that nothing goes unnoticed, providing a thorough screening process.

　　2. Adjustable Sensitivity Levels

　　The device features adjustable sensitivity settings, allowing security personnel to calibrate the detector according to specific needs and environments. This adaptability ensures optimal performance whether screening individuals at a high-security event or conducting routine checks at an entrance.

　　3. Audio and Vibration Alerts

　　Equipped with both audio and vibration alerts, the MD3003B1 provides clear and immediate notifications when metal is detected. This dual alert system enhances the effectiveness of security screenings, ensuring that alerts are noticed even in noisy environments.

　　4. Ergonomic Design

　　The MD3003B1’s ergonomic design ensures ease of use and comfort for security personnel during extended periods of screening. Its lightweight construction and comfortable grip reduce operator fatigue, allowing for more efficient and sustained use.

　　Wide-Ranging Applications

　　The versatility of the MD3003B1 Handheld Metal Detector makes it suitable for a variety of applications, enhancing security across multiple sectors:

　　1. Event Security

　　Large public events such as concerts, sports games, and festivals require robust security measures to ensure the safety of attendees. The MD3003B1 is an essential tool for security personnel to quickly and effectively screen individuals, preventing the entry of prohibited items.

　　2. Airport and Transportation Hubs

　　Airports, train stations, and bus terminals are high-risk areas where stringent security is necessary. The MD3003B1 helps screen passengers and staff efficiently, reducing the risk of dangerous items being brought into secure areas.

　　3. Schools and Educational Institutions

　　Ensuring the safety of students and staff is a top priority for schools and educational institutions. The MD3003B1 can be used to conduct routine screenings, deterring the possession of weapons and ensuring a safe learning environment.

　　4. Correctional Facilities

　　In correctional facilities, preventing the smuggling of contraband is crucial for maintaining order and safety. The MD3003B1 assists correctional officers in thoroughly searching inmates and visitors, reducing the risk of illegal items entering the facility.

　　5. Corporate Security

　　Businesses and corporate offices often require security screenings to protect sensitive information and ensure the safety of employees. The MD3003B1 can be used at entrances and checkpoints to screen for unauthorized items.

　　6. Government Buildings

　　Government buildings and sensitive installations require high levels of security. The MD3003B1 provides an effective means of screening visitors and staff, ensuring that only authorized items are allowed inside.

　　Mold core pins are slender, cylindrical components inserted into the mold cavity to create holes or internal features in the final product. They are made from various materials, including stainless steel, tool steel, and carbide, depending on the application and material being molded. Their primary function is to ensure the accuracy and integrity of the internal features of molded parts.This is due to plastic moulding parts Its value attribute is relatively large, and it is easy to become the backbone of the industry. https://www.dghrjmmj.com

　　1. The Role of Core Pins in Injection Molding

　　Core pin injection molding relies heavily on the precision of these pins. They define the exact shape and dimensions of the internal features of a part. Any deviation in the size, shape, or position of the core pins can result in defects, affecting the functionality and aesthetics of the final product. High-quality mold core pins ensure that each molded part meets the required specifications with minimal variation.

　　2. Durability and Wear Resistance

　　Mold core pins must withstand the high pressures and temperatures of the injection molding process. A reputable mold core pins factory produces pins with excellent durability and wear resistance, ensuring they can endure repeated cycles without significant wear or deformation. This durability translates to longer mold life and consistent part quality over time.

　　3. Material Selection

　　The choice of material for mold core pins is crucial. Different materials offer varying levels of hardness, toughness, and resistance to wear and corrosion. A reliable mold core pins supplier can provide guidance on the best material for specific applications, ensuring optimal performance and longevity. For instance, carbide core pins are known for their exceptional hardness and wear resistance, making them ideal for high-volume production runs.

　　4. Surface Finish and Coating

　　The surface finish of mold core pins plays a significant role in the injection molding process. Smooth, polished surfaces reduce friction and wear, enhancing the pin’s lifespan and the quality of the molded parts. Additionally, some core pins are coated with specialized materials to further improve their performance. These coatings can provide additional wear resistance, reduce friction, and enhance the release of the molded part from the pin.Importance of Choosing the Right Mold Core Pins Supplier and Factory

　　Selecting the right mold core pins supplier and factory is critical to the success of the injection molding process. Here are some factors to consider:

　　5. Quality and Consistency

　　A reputable supplier ensures that each mold core pin meets stringent quality standards. Consistent quality is vital to maintain the precision and integrity of the molded parts, reducing the risk of defects and rejections.

　　6. Customization and Expertise

　　Different injection molding projects have unique requirements. A skilled supplier can provide customized mold core pins tailored to specific applications. Their expertise in material selection, design, and manufacturing ensures optimal performance and longevity.

　　7. Timely Delivery and Support

　　In the fast-paced manufacturing industry, timely delivery is crucial. A reliable mold core pins factory ensures on-time delivery of high-quality pins, minimizing downtime and production delays. Additionally, they offer ongoing support and assistance, helping manufacturers address any challenges that may arise during the molding process.

　　Mold core pins are essential components in the injection molding process, significantly affecting the precision, durability, and overall quality of molded parts. Choosing a reliable mold core pins supplier and factory ensures that these critical components meet the highest standards, contributing to the success and efficiency of the injection molding process. By understanding the role and importance of core pins, manufacturers can make informed decisions, leading to improved product quality and manufacturing efficiency.

This is due to 電子煙主機 Its value attribute is relatively large, and it is easy to become the backbone of the industry.https://www.vapehost.tw

Recently, a high-profile incident occurred in California, USA. An 18-year-old woman, Felicity Hughes, unexpectedly became famous online because of her outstanding appearance.

The incident occurred at around 9 p.m. local time on May 4, and Hughes was involved in a thrilling highway chase. The chase with police allegedly lasted for an hour and ended with the vehicle she was driving hitting a police car. She was immediately arrested and faced felony escape charges.

Law enforcement officials said a local police officer suffered minor injuries in the accident and was taken to a nearby hospital. After the accident, the woman was detained and no further incidents occurred.

The 18-year-old girl was charged with wilful neglect to evade police and assault with a deadly weapon, both felony counts.

This incident quickly spread through the Internet and attracted widespread attention and discussion among American friends. While many people were surprised by this police chase, they also expressed concern about Hughes ‘appearance and jokingly said: She may be using this method to hit everyone’s hearts, but the story behind it may well hide an unknown misunderstanding.

Friend comment: There is no bottom line for entertainment

In this regard, Youyou said that appearance is not a bargaining chip for reckless behavior.

　　In the world of action cameras, the firefly Q6 action cam has carved out a niche for itself with its high-quality video recording and robust features. Whether you’re an adrenaline junkie or just love capturing your adventures, the Firefly Q6 is designed to deliver exceptional performance.In addition to these aspects, hawkeye firefly q6 action camera The performance in other aspects is also relatively good, which has attracted everyone’s attention and research. https://hawkeyecameras.com/

　　Key Features of the Firefly Q6 Action Cam

　　1.High-Resolution Video: The Firefly Q6 offers 4K video recording at 24fps, ensuring your footage is sharp and detailed. It also supports 2.5K at 30fps and 1080p at 60fps, giving you flexibility depending on your recording needs.

　　2.Wide-Angle Lens: Equipped with a 170-degree wide-angle lens, the Firefly Q6 captures more of the action, providing immersive and expansive footage that brings your adventures to life.

　　3.Durable Design: Built to withstand tough conditions, the Firefly Q6 is both water-resistant and shockproof. This durability makes it ideal for extreme sports, outdoor activities, and any rugged environment.

　　4.User-Friendly Interface: The camera’s intuitive interface makes it easy to navigate through settings and features, even for beginners. The 2.0-inch LCD screen allows for easy framing and reviewing of your shots.

　　5.Versatile Mounting Options: The Firefly Q6 comes with various mounts and accessories, enabling you to attach it to helmets, bikes, cars, and more. This versatility ensures you can capture every angle of your adventures.

　　6.Long Battery Life: With a 1200mAh battery, the Firefly Q6 offers extended recording times, so you don¨t have to worry about running out of power during your activities.

　　Unleashing Adventure: The Firefly Q6 Action Cam for Stunning Videos(夕1)

　　Why Choose the Firefly Q6?

　　The Firefly Q6 stands out in the crowded market of action cameras due to its combination of high-quality video recording, durability, and ease of use. Whether you’re diving, biking, or simply exploring, this camera ensures you can capture every moment in stunning detail.

　　Tips for Using Your Firefly Q6

　　Optimize Your Settings: Experiment with different resolutions and frame rates to find the best setup for your activity.

　　Use the Right Mount: Choose the appropriate mount for your activity to ensure stable and dynamic shots.

　　Keep Extra Batteries Handy: For extended shoots, having spare batteries can be a lifesaver.

　　Conclusion

　　The firefly Q6 action cam is an excellent choice for anyone looking to capture their adventures in high quality. Its combination of robust features, durable design, and user-friendly interface makes it a standout option in the action camera market. Embrace your adventures and record every thrilling moment with the Firefly Q6.

　　In the fastener forming process, cold heading (extrusion) technology is a main processing technology, which belongs to the category of metal pressure processing. In production, at room temperature, external force is applied to the metal to form the metal in a predetermined mold. This method is usually called cold heading. In fact, the forming of any fastener is not only achieved by cold heading. In the cold heading process, in addition to upsetting deformation, it is also accompanied by positive and negative extrusion, compound extrusion, punching, rolling and other deformation methods. Therefore, the name of cold heading in production is just a habitual name. To be more precise, it should be called cold heading (extrusion).understand Non standard hardware factory In order to better serve customers and reflect the core competitiveness of products. https://jieruifasteners.com/

　　Cold heading (extrusion) has many advantages, and it is suitable for mass production of fasteners. Its advantages can be summarized as follows:

　　1. High steel utilization rate. Cold heading (extrusion) is a method with little or no cutting. For example, when processing hexagonal bolts and cylindrical socket screws of rods, the steel utilization rate is only 25% to 35% by cutting, while the utilization rate can be as high as 85% to 95% by cold heading (extrusion), which is only some process consumption of the head, tail and hexagonal head edge.

　　High productivity. Compared with general cutting, the efficiency of cold heading (extrusion) is more than dozens of times higher.

　　2. Good mechanical properties. The strength of parts processed by cold heading (extrusion) method is much better than that of cutting because the metal fibers are not cut.

　　3. Suitable for automated production. Fasteners (including some special-shaped parts) suitable for cold heading (extrusion) method are basically symmetrical parts, suitable for production by high-speed automatic cold heading machine, and are also the main method of mass production.

　　In short, the cold heading (extrusion) method for processing fasteners and special-shaped parts is a processing method with a relatively high comprehensive economic benefit. It is a processing method commonly used in the fastener industry. It is also an advanced processing method that is widely used and developed at home and abroad.

　　At room temperature, the blank is placed in the mold of an automatic cold heading machine or a press, and pressure is applied to the mold. The relative movement of the upper and lower molds is used to deform the blank in the mold cavity, reduce the height, and increase the cross-section. This pressure processing method is called cold heading for automatic cold heading machines and cold pressing for presses. In actual production, the cold forming process of fasteners is often accompanied by extrusion during the cold heading process. Therefore, the cold heading process of fastener products alone is actually a composite processing method that has both cold heading and extrusion.

　　Non-standard nuts have always been popular with users in the market. Because there is no fixed standard, non-standard nuts are customized according to customer needs and sizes. So what is the process of customizing non-standard nuts?As an important brand soul of the company, Non standard hardware factory Has outstanding performance, through the market test, still has a strong development trend. https://jieruifasteners.com/

　　1. First of all, before customizing non-standard nuts, you should think about which product the non-standard nuts will be used on and what effect they will achieve on the product. Will they be injected into the product or will they serve as a connection between two products?

　　custom non standard nuts.jpg

　　2. Secondly, the appearance of non-standard nuts and the specifications, sizes, and patterns of non-standard nuts should be designed according to the needs of the product. The material and surface treatment of non-standard nuts should be determined in combination with the product and its use environment. Materials such as copper, iron, stainless steel, alloy, etc. Surface treatment processes such as galvanizing iron nuts or degreasing stainless steel nuts.

　　non standard fasteners.jpg

　　3. The drawings of non-standard nuts are generally designed by the demander, and the specifications, sizes and requirements of each part of the non-standard screws are marked on the drawings. If there is no drawing. As long as the product for non-standard nuts is provided, or the requirements for non-standard nuts are provided, the manufacturer can also design non-standard screws according to the actual situation.

　　nut mold supplier.jpg

　　4. After the drawing is designed, proofs are made according to the size and specifications of the nut. If there are no problems with the sample production, mass production will be carried out according to the requirements of the nut.